Skip to main content

Thread: Fglrx kernel module does not compile!

-

hai.
i've got toshiba satellite a300-20w notebook. damn toshiba's support linux not exist. >.>
ok. i'm trying install fglrx (i tried 9.12 , 9.8 ) drivers on ati mobility radeon hd 3470, kernel module fails compile. tried manually but... there's no makefile nor ./configure, make.sh produces output:
code:
[root@nucleon]:/var/lib/dkms/fglrx/8.681/build# ./make.sh   amd kernel module generator version 2.1  doing makefile based build kernel 2.6.x , higher  rm -rf *.c *.h *.o *.ko *.gcc* .??* *.symvers  make -c /lib/modules/2.6.31-17-generic/build subdirs=/var/lib/dkms/fglrx/8.681/build/2.6.x modules  make[1]: entering directory `/usr/src/linux-headers-2.6.31-17-generic'  make[1]: makefile: no such file or directory  make[1]: *** no rule make target `makefile'.  stop.  make[1]: leaving directory `/usr/src/linux-headers-2.6.31-17-generic'  make: *** [kmod_build] error 2  build failed return value 2
also when i'm installing drivers self-made .deb package or downloading repo, see:
code:
loading new fglrx-8.681 dkms files...  building initial module 2.6.31-17-generic, architecture -a x86_64     error! bad return status module build on kernel: 2.6.31-17-generic (x86_64)  consult make.log in build directory  /var/lib/dkms/fglrx/8.681/build/ more information.  done.     error! not locate fglrx.ko module fglrx in dkms tree.  must run dkms build kernel 2.6.31-17-generic (x86_64) first.     setting fglrx-modaliases (2:8.681-0ubuntu1) ...  setting libamdxvba1 (2:8.681-0ubuntu1) ...     setting xorg-driver-fglrx (2:8.681-0ubuntu1) ...
any ideas how can compile , add kernel module? ;o
strange, on ubuntu 9.04 x86 fglrx installing wothout problems. after upgrade 9.04 -> 9.10 x86 problem appeared. ;s

karmic koala amd64, kernel version: 2.6.31-17-generic.

*bump*


Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Hardware Fglrx kernel module does not compile!


Ubuntu

Comments

Post a Comment

Popular posts from this blog

Help with codes to add 1 more shift register and add more to matrix LED

-
hi im working on 8x10 matrix leds , successful @ using guide http://www.instructables.com/id/810-led-matrix-with-4017/ using 4017 , 74hc595 now want expand matrix 16x10. i connected , worked added 74hc595 control second 8x10. my problem want display text using both 8x10 im using code guide , modified think doesnt work code: [select] #define someshape    {b0100001001000010,b1110011101000010,b0100001001000010,b0000000001000010,b0001100001000010,b0001100001000010,b1000000101000010,b1000000101000010,b0100001001000010,b0011110001000010  }    #define all     {b1111111111111111,b1111111111111111,b1111111111111111,b1111111111111111,b1111111111111111,b1111111111111111,b1111111111111111,b1111111111111111,b1111111111111111,b1111111111111111  }                        #define someshape2   {b0100001001000010,b1110011101000010,b0100001001000010,b0000000001000010,b000110000100001...
Read more

tcp client

-
i'm using arduino uno , w5100 ethernet shield. i'm trying connect ethernet shield software downloaded ( sockettest v3.00) communication between server (sockettest) , shield (client).the shield jack connected router. created server under ip address of laptop. uses telnet client example can't connect server on sockettest. first time i'm doing tcp/ip , had done similar project or guide me on this. sockettest - http://sockettest.sourceforge.net/ uno - https://store.arduino.cc/arduino-uno-rev3 ethernet shield - http://www.hobbytronics.co.uk/arduino-wiznet-shield here code -------------------- code: [select] #include <spi.h> #include <ethernet.h> byte mac[] = {   0xde, 0xad, 0xbe, 0xef, 0xfe, 0xed }; ipaddress ip(192, 168, 1, 220);// shield ip ipaddress server(192, 168, 1, 37); // computer ip ethernetclient client; void setup() {   // start ethernet connection:   ethernet.begin(mac, ip);// open serial communications , wait port open: ...
Read more

Can't read sms using Thinker A7 communicate with Arduino

-
Image
hi guy i'm trying communicate ai thinker a7 module. on arduino uno r3 im using pin 7,pin 8 connect utxd & uaxd. when send sms phone module thinker 7, use arduino read sms. my code bellow code: [select] #include <softwareserial.h> #include <string.h> char incoming_char = 0; softwareserial cell(7, 8); //my shield uses these pins software serial. void setup() {  serial.begin(115200);  cell.begin(115200);  delay(2000);  serial.print("starting modem communication...");  delay(12000);  serial.print("ok\nintroduce @ commands:\n"); } void loop() {  if(cell.available() > 0)  {    incoming_char=cell.read();        if(incoming_char=="a"){      serial.println("content of sms a"); //if sms contains "#" arduino looks commands follow.      serial.println(incoming_char);    }    else    { ...
Read more